1·All open Zero pressure drop.
全开状态零压降。
2·The steam pressure or water pressure drop.
蒸汽压力或给水压力下降。
3·Energy costs go up with excessive pressure drop.
如果压降太大，会增加能量消耗。
4·However, the pressure drop occurs almost completely in the plug.
然而，压力降几乎完全发生在多孔塞中。
5·As soon as a pressure drop is noticed the nozzle should be replaced.
一旦发现压力降低，喷嘴就需要更换。
6·Read the pressure drop across the valve with a Watts Series PG meter.
利用美国瓦茨系列PG仪器读出通过阀门的压降。
7·This is caused by different pressure drop from one trap to the other.
这些都是由于从一个阱换成另一个阱产生不同的压力而造成的。
8·Reach the set pressure pump auto stop, the resumption of work pressure drop.
到达设定压力时泵自动停止，压力下降时恢复工作。
9·The pressure drop increases as the Reynolds number, the fin width and the fin height increase.
压力下降的情况会随着雷诺数升高而升高，也会随着散热片的高度和宽度提高而提高。
10·When operating basket chamber shows a high pressure drop the flow is switched to the other one.
一旦工作中的过滤篮出现高压骤降现象，液体流会转移到另一个过滤篮。